Overview
On site programmable PT/CT ratios
It is possible to program primary of external potential Transformer site via (PT), primary of external Current Transformer (CT) on front panel keys by entering into Programming mode.
User selectable CT Secondary 5A/1A
The secondary of external Current Transformer (CT) can be programmed on site to either 5A or 1A using front panel keys.
User selectable PT Secondary
The secondary of external Potential Transformer (PT) can be programmed on site from 100VLL to 500VLL using front panel keys.
User selectable 3 phase 3Wire or 4Wire or Single phase Network (Option available with external aux only)
User can program on site the network connection as either 3 Phase 3 Wire or 4 Wire using front panel keys. In case of self powered Rish Delta either 3 Phase 4 wire or single phase network can be given.
Low back depth
The instrument has very low back depth (behind the panel) of less than 54mm.
True RMS measurement
The instrument measures distorted waveform up to 15th Harmonic
RPM Measurement
The instrument display Rotation per minutes for generator applications. Number of poles can be set on site depending upon application requirement.
Hour Run, ON Hour
Hour run records the number of hours load is connected.
ON Hour is the period for which the auxiliary supply is ON.
3 line 4 digits LED display (Optional): I
Simultaneous display of 3 Parameters.
Onsite selection of Auto scroll / Fixed Screen
User can set the display in auto scrolling mode or fixed screen mode using front panel keys.
Min Max storage of parameters possible
The instrument stores minimum and maximum values for System Voltage, System Current, Run Hour, ON Hour. Every 60 sec stored values are updated.
One line alphanumeric LED display (Optional)
20mm LED display for parameter value display and 14mmalphanumeric display for parameter unit.
Four function keys
Using the four function key, it is possible to go desired parameter screen instantly.
Enclosure Protection for dust and water
Conforms to IP 50 (for front face) as per IEC60529
EMC Compatibility
Compliance to International standard IEC 61326.
